Hycules Hydraulic Angle Rolling machine

Customized service

Contact our sales to get a more detailed quote.

The angle rolling machine is available in both CNC and NC with Hycules specially developed auto learning software, which removes the need to do sacrificial test bends and therefore reduces scrap material and wasted production time.

If bending the largest profiles is a requirement, then look no further than the angle rolling machine from Hycules.

Standard Manual Drop-End
Optional Control Panel with digital read-out
Tailored-made Plate Bending Machine

Product Description

Angle Rolls standard specification

Three driven rolls
Standard rolls
Horizontal & vertical working position
Foot pedal with safety device
Bottom rolls with programmable digital read-out
Hydraulic adjustment of bottom rolls
Electronic overload protection
Lateral guide rolls (MAH60/3AC – MAH120/3AC)
Hydraulic standard guide rolls (MAH150/3AC)
Hydraulic angle bending guide rolls (MAH150/3AC)

Technical Parameter

Technical parameters	6	16	30	45	75	100	140	180	260	320	400	500
Maximum modulus of flexural section	6	16	30	45	75	100	140	180	260	320	400	500
Rolled plate speed	6	6	5	5	5	5	4	4	4	4	4	4
The yield strength	S=450	S=450	S=450	S=450	S=450	S=450	S=450	S=450	S=450	S=450	S=450	S=450
Inside of Angle steel Maximum bending size（mm)	40X5	70X8	80X8	90x10	100X10	120X12	140X16	150X16	160X16	180X14	200X18	200X20
Outside the Angle steel bend Maximum bending size（mm)	50X5	80X8	90X10	100x10	120X12	140X16	150X16	160X16	180X14	200X18	200X24	250X25
Channel steel outside bend Maximum bending size（mm)	8	12	16	20	25	28	30	32	36	40	45	50
Inside of channel steel Maximum bending size（mm)	8	12	16	20	25	28	30	32	36	40	45	50
Flat steel flat bend Maximum bending size（mm)	100X18	150X25	180X25	200x30	220X40	250X40	280X50	300X50	330X50	360X60	400X75	500X76
Flat steel bending Maximum bending size（mm)	50X12	75X16	90X20	100x25	110X40	120X40	150X40	180X30	190X40	190X50	200X50	200X60
Circular tube Maximum bending size（mm)	42X4	76X4.5	89X5	89x8	114X5	159X5	186X6	168X8	219X8	245X8	273X8	323X10
Round bar Maximum bending size（mm)	38	52	62	75	85	90	100	110	120	135	150	160
Square tube Maximum bending size（mm)	45X3	60X4	70X4	80x6	90X8	100X10	125X10	140X10	150X10	165X10	180X12	200X12